Job Description :McMurtry Automotive Ltd. is a start-up company located near Bristol, UK, that is working on an exciting project to deliver a radical, high-performance electric vehicle and new technology in the automotive EV sector.The funded project offers a unique opportunity to start from a clean design sheet and work in a team of highly motivated and talented people, with experience ranging from F1 to sports car OEMs.all in a very short space of time.McMurtry Automotive is situated in beautiful countryside on the edge of the Cotswolds. Staff benefit from regular company socials, such as go-karting and clay pigeon shooting in addition to access to on-site squash court and swimming pool.The office achieves a very social feel at lunchtimes, with staff relaxing with walks around our beautiful grounds or FIFA tournaments.Position Summary :As a vehicle test engineer, you will be expected to take an active role in facilitating and delivering an effective vehicle development programme.Within this, you can expect to undertake the following tasks :Required Qualifications & Experience :A great deal of commitment, adaptability and autonomy will be required as we look to go from a concept through to a demonstrator vehicle and into low volume production;Planning vehicle testing alongside development engineersSetup of required telemetry and data analysis in preparation for testsRunning tests on the day ensuring efficient use of circuit time & that suitable data has been obtained for all test objectivesStaying away with the car when requiredReporting data and outcomes from vehicle testing within the teamDetailed analysis of specific tests where requiredMonitoring of vehicle status and usageOngoing development of more advanced test data analysis toolsLiaison with test venues to book appropriate testing facilitiesRelevant degree level qualificationA good technical understanding of major systems on a high performance EVExperience of vehicle testing, ideally within in a high level motorsport or automotive environmentExperience of MATLAB or other scripting languageExperience of automotive / motorsport logging and data analysis tools
Receptix • Bristol, United Kingdom
Responsible for the design & development and complete delivery of the Lower Front system module. The work requires domain expertise in metal, plastic & composite components related to Truck lower front module such as Hood and Bumper systems and other structural and protection components. It is a key role in coordinating the operational work needed to ensure cross functionally anchored concepts and technical solutions meet defined product QDCF targets.Expert in plastic tooling design and manufacturing process.The role covers several aspects of the product development process and the deliverables are largely driven by Gates, Releases and Design loops.Core ResponsibilitiesResponsible for the development of products / parts and release of the solutions into the system with complete product ownership and tackling quality issues effectivelyPerforms design, testing/validation and/or development projects within area of assignment to fulfill the project set Quality, Delivery, Cost, Feature targets.Generate Value Engineering and Value Analysis (VA/VE) and Continuous Improvement (CI) ideas to reduce product costs and drive/support implementation as needed.Analyze component parts and assemblies to determine the best course of action required to resolve actual or potential problems and implement cost effective solutions.Support packaging engineers in packaging and installation tasks (e.g. technical reports, packaging investigations, DMU utilization)Build & follow component design time plan to meet project deadline.Responsible to independently drive Cross functional activities to close out development open points and achieve set project deliverables.Must have Global mind-set to collaborate and work with engineers mostly at Cab, Chassis, Styling, Vehicle Architecture, Verification & Validation team both Locally as well as Other sites within Volvo.Take ownership in development of engineering process & method documents (TR, guidelines, rules etc.)Contribute towards knowledge management within the area of assignment.
VolvoAuto Sweden Sa • Bangalore, India
The Building Engineer you will be supporting the Chief Engineer and team in all preventative maintenance duties of a Class A office building. Your duties will include, but are not limited to mechanical, electrical, HVAC, plumbing preventative maintenance, etc. What you'll need to succeedYou will have a minimum of 2+ years of technical experience in a Class A office settingYou will have excellent communication skills with internally and externally and ability to work with a teamExperience with all general maintenance requirements of the building (electrical, plumbing, preventative)Must have the ability to troubleshoot and read/understand blueprints What you'll get in return You will receive a generous compensation package that includes a competitive salary and opportunity for growth!
HAYS PLC • Seattle, U.S.
Aujourd’hui, je recherche pour mon client, expert dans le domaine du bâtiment, un(e) Ingénieur structure béton armé / Chef de projet H/F pour accompagner son développement.Ce challenge vous attire ? Intéressons-nous à vos missions :Vous êtes le point de contact des différentes parties prenantes des projetsVous gérez vos projets en collaboration avec les dessinateurs projeteurs structures, qui réaliseront les plans/schémas. Vous allez les piloter !Vous réalisez les différentes pièces de la phase études sur votre spécialité structure BA (modélisations, calculs / notes de calculs, dimensionnements)Vous intervenez en études phase conception et exécutionVous suivez les affaires, jusqu’à réalisation des opérationsVous allez travailler sur des projets variés : bâtiments tertiaires, ERP, logements, santé, industriels. Les projets seront majoritairement orientés béton armé mais il y aura également quelques références mixtes (alliant béton, structures métalliques et/ou bois) Votre profil ?Vous avez une expérience en tant qu’ingénieur structures au sein d’un bureau d’études (minimum 2 ans). Je suis ouverte à un profil travaillant en BE conception et/ou exécution.Vous avez une très bonne maitrise des études de bâtiments en béton arméVous êtes impliqué dans votre travail, rigoureux et accordez une réelle importance à la satisfaction client.Les plus ?Une structure avec de belles valeurs humaines et des équipes stablesL’état d’esprit est positif et sainDes évolutions seront possiblesPoste basé sur le secteur de Lyon, en CDI.
Approach People Recruitment • Lyon, France
Au sein du RD&E pour la ligne de produits plieuses-colleuses, vous rejoignez l’équipe Automation, qui est à la recherche de son (sa) futur(e) ingénieur en Automation.Référent (e) électrique dans le cadre de la planification et du suivi des projets de la ligne de produitsDimensionner les actionneurs pour réaliser la fonction machine en utilisant les outils mis à dispositionChoisir les composants en collaboration avec les services de standardisation et des achats, afin de garantir la pérennité, la disponibilité « world wide » et le respect des différents standardsRéaliser le schéma de principe de sécurité en respectant les règles établiesRéaliser le soft de sécurité à l’aide des outils software à dispositionRéaliser les schémas électriques fonctionnels de la fonction avec les informations nécessaires à la saisie de celui-ci par le constructeur électrique du projetRéaliser la fonction selon le descriptif fonctionnel établi à l’aide des outils de développement à dispositionRéutiliser ou modifier les unités de librairie à disposition en garantissant la stabilité du code pour les autres utilisateurs de cette librairieRéaliser les écrans de conduites machines associés à la fonctionParticiper activement à la mise en service de la fonction sur la machine dans les différents sites de production ou chez les clientsEn collaboration avec les ingénieurs de validation et les monteurs instructeurs, apporter les modifications nécessaires au bon fonctionnement de la machine tout en gardant de la cohérence entre les différentes machines du produitPartager le choix des solutions avec les différents experts.Votre profilTitulaire d’un diplôme d’ingénieur HES, EPF ou équivalent dans le domaine électrique ou de l’automationExpérience confirmée d’au moins 3 ansUne expérience en gestion de projets serait un atoutVous êtes disposé(e) à effectuer des déplacements à l’étranger, env. 20%Vous disposez de très bonnes connaissances d’anglais, la maîtrise d’autres langues est un plusVous connaissez la programmation Delphi, orienté objet, et “Motion Control”Bon-ne communicateur-trice, vous êtes apte à travailler en groupe pluridisciplinaireOuvert(e) et orienté(e) clients, vous disposez d’une réelle aptitude à entrer en relation avec autrui et à créer un climat de confianceOrganisé(e) et autonome, vous possédez une grande capacité d’adaptation et de gestion du stress.
Approach People Recruitment • Lausanne, Switzerland
Etes-vous prêt à booster votre carrière en rejoignant une entreprise internationale leader mondial dans les systèmes automatisés? Nous recherchons un(e) Ingénieur en Informatique Industrielle pour travailler dans un environnement international et dynamique.Vos Missions :Au sein du site de production et directement rattaché au Chef de Projet, vous aurez en charge les missions suivantes :Responsabilité de la partie automation du projet confiéTravaux d’automation au sein d’un groupe de projetsProgrammation sur différentes plateformes évolutives de type industrie 4.0Programmation d’automates sur Siemens (S7), PC industriel et Allen BradleyProgrammation en langages évolués : un avantageTroubleshooting sur les automatesPlanification et suivi du projet en collaboration avec le Chef de Projets et l’équipeSupport technique automation en interne et externeMise en service des projets en interne et réception finale chez les clients étrangersVotre Profil :Vous êtes diplômé(e) d’une formation d’Ingénieur en informatique industrielle ou formation jugée équivalente (Niveau équivalent à HES)Vous avez une excellente connaissance théorique et pratique des langages de programmation orientés objet (C++, C#) ainsi que les applications temps réelVous avez au minimum 1 an d’expérience sur l’automation de machines industrielle à forte cadenceVous êtes rigoureux(se) et organisé(e) et aimez travailler en équipe.Vous maîtrisez la langue française et anglaise.
Approach People Recruitment • Neuchâtel, Switzerland
Position: Insurance Consultant Engineer, Location: MilanWe currently have two fantastic opportunities to join the Operations Engineering team as Consultant Engineer based in Milan and reporting to the Group Manager Field Engineering. The Consultant Engineers will be working out from our office in Milan and will use their expertise to consult with clients to protect their facilities against potential fire, mechanical and electrical breakdowns, and many other hazards, gradually moving to work with high hazard clients.Responsibilities Work in partnership with our clients, understanding their businesses and helping them to prevent and to control fire and/or equipment related losses.Ensure that all hazards are properly identified at client locations: conduct on-site loss prevention evaluations that identify all reasonably foreseeable physical and human element exposures perils.Accurately quantify exposures at client locations to assure that the Account Team places an appropriate level of attention on the exposure and the impact to the business.Take appropriate steps to guarantee the operational functionality of protective equipment at client locations to maximize the opportunity for loss mitigation and ensure that the protection systems are maintained at all times.Obtain local client understanding and agreement on the hazards/exposures discovered and their potential business impact.Achieve practical, effective on-site risk improvement, such as human element / maintenance programs and low / moderate cost physical improvements. And develop a plan for completing target recommendations for high capital improvements align with Account Engineering.Illustrate the value-added differential of our client’s engineering capabilities, and in conjunction with Account Engineering innovative methods to educate the client on loss prevention that should be pursued where appropriate.Identify upcoming changes to prevent associated exposures, providing timely high quality plan review services for medium complexity changes to ensure that proper loss prevention considerations are achieved at the design stage.Knowledge & SkillsEngineering degree educated with a minimum of 2 to 3 years experiences in a high hazard industry (production, maintenance dept. or as process hazards consultant) such as chemical, power generation or pulp & paper. Five years chemical or mechanical degrees would be a plusSelf-starter, problem-solving oriented and solution provider mindset, along with a genuine desire to bring about risks’ improvement.High attention to details, organizational skills, strong analytical thinker with logical application.Excellent communication and interpersonal: listening, negotiation and presentation skills are essential.Fluency in Italian & English – written & oral. German and Spanish would be a plusThe role requires extensive travelling in an assigned geographical area, but also throughout the operation territory.
Approach People Recruitment • Milan, Italy
JOB SUMMARY Responsible for providing sterilization-engineering support to Medline Industries worldwide operations. This role will assist/direct the design, installation, commissioning and start-up of facility sterilization process, abatement equipment [EO, Radiation], where needed, and ancillary supporting systems. Moreover, this role will drive projects with existing sterilization modalities that enhance Quality/Reg. Compliance, reduce operating costs through cost reduction, improved process control or improved machine reliability. RESPONSIBILITIES INCLUDE:Sterilization engineering support for greenfield and brownfield ethylene oxide sterilization facilities. This includes developing standardized URS, HAZOP/pFMEA/PHA, Risk Assessments, FAT, SAT and IQ documentation. With internal/external resources develop a sustainable model for sterilization facilities, minimizing bespoke costs.Lead stress testing of suppliers control system software and integration of controls w/process for a given sterilization modality.Engineering support for Sterility Assurance activities related to alternative sterilization methodologies, such as, but not limited: Ebeam, X-Ray, Aseptic Processing, Moist and ry Heat. This will include performing in-house engineering feasibility studies, design and qualification specifications for said methods on an industrial scale. Drive approved alternative methods to completion.Review existing in-house sterilization equipment, to include Control System Software, and ancillary systems for gaps and improvement opportunities. Prioritize improvements in accordance with business risk. Provide technically competent solutions, to include time-line for completion and budgetary considerations. Depending on site/team skill set, either marshal/oversee resources or direct internal/external resources for improvements. Provide training as necessary to improve internal skill set.Provide engineering solutions at existing sites to automate/integrate pallet conveyance throughout in-house EO facilities, collaborating w/Engineering, Quality and Operations.Standardize means/methods at internal sterilization sites, brown or greenfield. Where applicable, control system hardware and software, instrumentation, calibration and maintenance activities are primary drivers. Insure each sites%26rsquo; critical sterilization component/equipment/software has a backup to minimize risk and insure business continuity.Support Sterility Assurance team with IQ/OQ/PQ, Risk Assessments, CAPA%26rsquo;s, Audits, etc.Benchmark internal/external sterilization modalities, insuring best practices for Medline owned sterilization equipment/facilities.Working understanding of US and International regulations associated with various modes of sterilization, specifically EO.This is a high-level individual contributor role. May be involved in hiring staff, recommending pay increases, performing performance reviews, training and development of staff, estimating personnel needs, assigning work, meeting completion dates, interpreting and ensuring consistent application of organizational policies.COVID-19 Vaccination Please be aware that Medline requires all employees starting in this position to be fully vaccinated against COVID-19. This position will require the successful candidate to provide proof that they are fully vaccinated by their start date. Medline is an equal opportunity employer, and will provide reasonable accommodations to those individuals who are unable to be vaccinated for COVID-19 consistent with federal, state, and local law. EDUCATION:Bachelor's degree in mechanical engineering, biomedical engineering, electrical engineering, or equivalent mechanical/electrical degree. A Life Science degree with a minimum 10 years demonstrated professional engineering roles/expertise is acceptable. WORK EXPERIENCE:A minimum 10 year sterilization equipment experience required. SME in ethylene oxide sterilization equipment (primary)/processes (desirable) from an engineering perspective. Secondary expertise in other methodology is desirable, such as, but not limited to: E-beam, X-Ray, Gamma, Dry Heat, Moist Heat, Aseptic or novel sterilization methods.Preferred 10+ years hands-on-of experience in a regulated industry, with sterilization engineering, EO required, Dry or Moist Heat desirable.A Controls/Automation background is required; 8+ years%26rsquo; experience with Sterilization Software Programming & Integration.Proficiency in AutoCAD required, as well as Microsoft Suite [Word, PowerPoint, Excel, and Project]. Statistical analysis desirable using Minitab or equivalent.Ability to work effectively in cross-functional teams. Ability to work independently and manage multiple tasks and priorities.Position requires travel up to 30% of the time for business purposes (domestic and international).Sterilizer equipment, and Controls Hardware and Software. Relevant standards associated with EO modality.Benchmarking and project management skills to develop scope, capital cost, and timelines in support of capital projects.
Careerbuilder • Northfield, U.S.
Who are you and what will you do?You are the technically capable and passionate leader of our Propulsion Systems Integration team based in Greensboro, NC. While guiding the PSI team, you will report directly to the North American Powertrain Engineering Vice President in Hagerstown, MD. With your excellent networking skills, you will represent Powertrain Engineering in a variety of local and global teams within which you will coordinate activities, process development/execution, and competence development.You will directly lead a section of engineers to integrate propulsion systems into vehicles that meet customer requirements, regulatory, and Volvo Group objectives. Integration includes packaging, electrical, mechanical, and all other aspects required to integrate propulsion systems into vehicles. You will contribute to the Volvo Group’s competitive market position by assuring the development and maintenance of products and product components that out-perform the competition in quality, delivery, cost, and function, while ensuring they comply with all applicable regulatory requirements.You will showcase your abilities to negotiate and manage relationships as the Director responsible for vendor engines for North American applications, regulatory compliance, and Validation and Verification of North American Powertrain products. The validation and verification of these products must stay aligned with commitments to projects and other defined customers, and will remain consistent with corporate strategy, global processes, standards, and regulations.You will demonstrate both your organizational and people leadership skills by being responsible for planning, budgeting, and Human Resources functions in the section, e.g., securing resources, competence and professional development, and talent management for all employees. (Our People & Culture team are looking forward to partnering with you!)Responsibilities and authorityResponsibilitiesRepresent Powertrain Engineering (PE) on site at the satellite office located in Greensboro, NC.Represent Powertrain Engineering in the North American Vehicle Product Decision Committee.Product development and maintenance for the Cummins North American engine platform (9L – 15L engines) and drivelines with regards to quality, cost improvement, follow-up, and Product Modification Requests.Regulatory documentation compliance coordinated with Cummins for Cummins OEM installed powertrain products in North America.Responsible for all first estimates for PE Product Modification Requests in North America.Represent Powertrain Engineering in all customer adaptation activities for North American products.Responsible for Continuous Improvement activities for the section, coordinated with global and regional program leaders including Operational Development.Responsible for ensuring use of relevant processes and methods.Responsible for developing and maintaining appropriate cross functional network with the counterparts at other Powertrain Engineering sites, Vehicle Engineering sites and with other functions.Responsible for planning, budgeting, and follow-up of all section activities.Breakdown and follow up of targets from the Site VP and from global leaders including development, reporting and improvement of Key Process Indicators for the section.Responsible for ensuring coordination across projects and divisions.Responsible for Human Resources functions in the section, e.g., securing resources, competence and professional development, and talent management for all employees (e.g., Personal Business Plan).Perform administrative reporting (e.g., costs, investments, and employment changes).Frequent travel to the Hagerstown, MD (Main PE office) is required.International travel may be required from time-to-time.AuthoritiesApprove deliveries according to relevant processes and authorizationsApprove purchases of materials and services consistent with the position’s authority levelApprove travel plans and expense reports for your sectionApprove time reporting for your direct reportsApprove personnel requisitions issued in your sectionMake relevant HR decisions with the support of our People & Culture teamWhat are we looking for?BS in Engineering (required). Advanced technical or business degree preferred.10+ years of relevant experienceSuccessful experience in Group or Project managementStructured, analytical, and holistic mind-setProject/Team leading experienceStrong oral and written communication skills in EnglishGood knowledge of systems engineering, quality assurance methods and documentationCompassionate and willing to mentor and grow your team
VolvoAuto Sweden Sa • Greensboro, U.S.
Capstone are working closely with a global multi-disciplinary consultancy who are in turn providing services for blue chip clients. This role is essentially working within the property department of this global datacentre business.The PCE works closely with Project Leads, Project Managers, Cost Managers and the wider team to ensure the reporting process and outputs are produced on time, robust, accurate and are of high quality. A key part of the role is to champion continuous improvement in the Project Controls function to ensure stakeholders have the confidence in what the team are reporting.Key AttributesStrong attention to detail.Proactive, "can-do" attitude.Ability to work under pressure.Can work and deliver autonomously.Excellent MS Excel, Powerpoint skills.Strong communication skills (both written and verbal) to various levels of the Client organisation.Ability to crystallise sometimes complex messaging into easy to understand outputs to a non-project audience.Ability to critically review own work - continuously improve delivery.Key DeliverablesOversee the Capital Projects reporting cycle on behalf of the Portfolio Deputy DirectorProduce the Portfolio Dashboard on a monthly basisManagement Board and other senior stakeholders.Ensure project dashboards are produced on time for reviewChair the Dashboard Review Meetings, providing assurance and challenge to the dashboards and ensuring accuracy and consistency from the previous month's dashboard.Produce the Portfolio Interim Dashboard on time, on a monthly basis, collating and challenging responses from the project teams and ensuring accuracy and consistency from the previous month's dashboard.Own and manage the Project Approval Panel (PAP) lookahead reporting on status on a weekly basis at the Portfolio meeting.Produce the Portfolio Monthly Report for the Portfolio Management TeamOversee the Capital Projects Risk process and provide support to the PMO to integrate risks across the various functions.Support DgP SF PMO with cross function risk management.Championing continuous improvement within the project lifecycle - improving processes and documents.Provide support to Capital Projects Management Team to deliver ad-hoc requests for presentations, other outputs etc.
CAPSTONE LTD • London, UK
Jacobs Energy and Power Solutions Group has rewarding opportunities for electrical engineers focusing on power generation and distribution applications. This position is available in New Orleans or Baton Rouge, Louisiana. In this role, you will be responsible for Energy and Power Solutions Group related design work for varied municipal and private clients including power generation and distribution, combined heat and power, and utility distribution on multiple projects of various sizes. Here’s What You’ll Be Doing:Electrical system analysis, design, equipment procurement, construction support, and commissioning support related to electrical systems for power generation applicationsElectrical system analysis and design of project power system interconnection to utility power system and associated equipmentSmart device, also commonly referred to as intelligent electronic device (IED), integration into electrical systems designEquipment specifications, procuring, and factory acceptance testing engineered electrical equipment including switchgear, transformers, electrical system control equipment, and various other electrical systems elements as required for project designSystem modeling and calculations including lightning protection, grounding, load flow, voltage drop, short circuit, and arc flash analysisProtective relaying schemes including development of coordinated relay settings and automation for advanced networked electrical protection systemsDevelopment of construction document packages including required specifications and drawings that will be utilized for bidding and constructionCommunication and coordination with Client, Contractors, and outside partiesGrowth into supervision of design and production team resourcesB.S. (minimum) in Electrical Engineering is requiredProfessional Registration (P.E.) is requiredDetailed experience in the development, design, procurement, engineering support of construction, and engineering support of commissioning of heavy electrical, utility and heavy industrial, power systems; medium voltage experience, at a minimum, is requiredIdeally, you’ll also have:Industrial power plant electrical systems evaluation and design; related experience in chemical, petroleum, and other heavy industrial process plants is acceptableHeavy industrial substation design, including relay protection and utility interface interconnection and agreements with utility companiesProtection system design, including associated IED automation with demonstrated experience configuring IEDs in native IED syntaxElectrical system modeling using ETAP, SKM, or similar modeling softwareTask lead experience including scope and fee development, and project execution while meeting established schedule and budget requirementsAbility to direct the production of design packages using design automation tools such as 3D AutoCAD, Revit, or equivalentDesign for turbine generator electrical system in excess of 10MWSome travel required
Careerbuilder • New Orleans, U.S.
About the PositionWe are seeking passionate people to join our growing and dynamic maintenance team in Texas! Our Part Time Building Engineers are customer service representatives for our clients and their tenants. They also focus in on any and all maintenance needs for the properties that they oversee. This position’s primary responsibility is to safeguard the interests of the owners and safety of the tenants by maintaining the physical condition of the property and equipment according to company guidelines and standards, as well as protect the property and equipment from damage, loss, and deterioration. The ideal candidate has a go-getter attitude, is a self-motivated team player, and a true jack of all trades.Responsibilities:First point of contact and representative of management, as well as ownership, the candidate should have strong customer service and communication skills.Conduct routine assessments of the building systems operations.Responsible for minor repairs, preventative maintenance, and service requests on building equipment, tenant spaces, and components located in the interior and exterior of the building.Oversee the property’s mechanical, electrical, plumbing, and fire systems; report deficiencies to Operations team and Property Manager.Respond to tenant requests in the areas of safety, plumbing, mechanical, electrical, and environmental needs through both personal contact and work order systems.Be pro-active with the buildings and create/maintain an ongoing task list of potential work for the property management group.Follow and assist in the creation of additional standard operating procedures (SOP’s) as needed.Maintain great communication with the Operations Support staff and Property Managers.Be the main point of contact for vendors on assigned properties. Building Engineers will be in charge of checking vendors in/out, escorting them to area of assigned work, and taking thorough notes of work performed.Assist with fire panel and fire extinguisher inspections. Make sure to notify tenants when inspections are planned.Miscellaneous tasks such as garbage removal and exterior lock box inspections.Enforce a safe jobsite and maintain compliance with company safety, OSHA, and customer-specific safety standards.Other duties as assigned.Requirements:High School Diploma (or GED or High School Equivalence Certificate)A minimum of 3-5 years commercial building operations and engineering experience preferredAbility to handle multiple projects and make decisions independentlyProficiency in working with hand held devices (smartphones) and electronic work order systemsMust possess strong organizational skills and motivation to get the job done wellMust be comfortable in a fast paced and dynamic environmentAbout Bevara’s BenefitsRoth and traditional 401K retirement plans offered
Bevara • Houston, U.S.