Summary of Role\:GlobalFoundries Fab 9, the world leader in RF semiconductor manufacturing in Essex Junction, VT, is seeking an entry level Semiconductor Process Engineer. The individual selected for this position will be part of the Manufacturing Engineering organization with primary responsibilities focused on development, support and continuous improvement of 200mm semiconductor manufacturing processes.Essential Responsibilities include\:Establish and manage the equipment quality control planDrive continuous improvement efforts in support of throughput improvement, cost reduction, and yield learningDefine and maintain equipment installation process qualification roadmaps - Drive process qualifications, implement process control plans and configuration with the area equipment engineers, including qualification, start up and volume ramp of process equipmentDesign, execute, and analyze experiments to screen and optimize manufacturing processes to meet technology (performance, yield, and reliability) and manufacturing (process stability, cost of ownership) targetsMust be technically inclined and able to lead hands on, tactical troubleshooting efforts to resolve long term performance issues; must be able to deconstruct and understand complex systemsCollaborate with GlobalFoundries integration, equipment and quality engineering to support the development of improved next generation technologies.Support technology transfer to other fabricatorsAbility to marry both the equipment and process sides of issues, focusing on delivering the right results on productOther Responsibilities\: Perform all activities in a safe and responsible manner and support all Environmental, Health, Safety & Security requirements and programs.Qualification:Required Qualifications\:Technology related Bachelor’s Degree in Chemical Engineering, Electrical Engineering, Materials Science, Solid State Physics or other relevant disciplineFluent in English10% travel may be requiredPreferred Qualifications\:COOP/Intern in semiconductor or manufacturing industryKnowledge of semiconductor/silicon processingUnderstanding and knowledge of Statistical Process Control (SPC) and Design of Experiments (DOE)Prior experience working in a semiconductor cleanroom environmentTechnology related Master’s and/or PHD degree\: Chemical Engineering, Electrical Engineering, Materials Science, Solid State Physics or other relevant disciplineAbility to work effectively and efficiently with diverse teams, customers, internal and external partners
Careerbuilder • Essex Junction, U.S.
A Pharmaceutical Company is seeking a Research Associate in Frederick, MD. Role Description This role will provide process engineering and analytical support for commercial manufacturing of cell therapy. Working cross functionally with quality, operations, material management, facility and engineering functions, the role is expected to provide technical input for product/process response and investigations, technology implementation, technology transfers, process validation and regulatory filings. • Execute scientific laboratory studies to support process/product understanding and continuous improvement projects • Execute analytical testing of cell therapy products – flow cytometry, ELISA and PCR assays. • Ability to follow laboratory procedures with attention to detail, and successfully execute experiments at the bench • Provide technical input to the execution of process validation and comparability campaigns. • Participate in evaluation of new technology and process automation for introduction into GMP manufacturing • Participate and support process FMEAs to understand process and product risks as a pre-requisite for process validation. • Participate and report to a cross-functional team to advance production activities. • Participate in Operational Excellence activities within Tier Structure. • Participate continuous improvement projects supporting commercial manufacturing site • Ensure systematic DMAIC based approach utilization for process/product related investigations to identify root cause and provide impact assessment to maintain routine manufacturing operations and determine process improvements for manufacturing. • Support technology transfers of launch and commercial cell therapy products • Effectively & efficiently communicate manufacturing process performance internally. • Support the implementation of automation and IT infrastructure projects • Assist in writing technical documentation (protocols & reports for equipment/instrument qualifications, comparability, and cell therapy manufacturing process validation) Skills & Requirements • Bachelors Degree in Biochemical Engineering, Tumor Immunology, Biotechnology or Life Sciences. • Basic understanding in Bioprocessing, Cell Culture and Biochemistry. • Knowledge of ELISA and/or PCR testing • Knowledge in flow cytometry and data analysis (FACSDiva, FlowJo, GraphPad Prism, Excel) is a plus • Ability to think critically, demonstrate troubleshooting and problem-solving skills • Excellent interpersonal, verbal and written communication skills are essential in this collaborative work environment • Previous experience with other technologies is a plus • Experience with the use of Microsoft word, Excel, Power Point, Smartsheet, Prism, JMP, and other data analysis applications • Highly collaborative with excellent interpersonal, verbal and written communication skills • Ability to think critically with demonstrated problem-solving and troubleshooting skills • Comfortable working in a fast-paced company environment with minimal direction and able to adjust workload/assignments based upon changing priorities • Self-motivated, detail-oriented, and willing to accept temporary responsibilities outside of initial job description
HAYS PLC • Frederick, U.S.
Job BriefThe Manufacturing Engineer is responsible for evaluating existing processes, configuring and implementing new processes to increase efficiency, reduce cost, improve sustainability, and maximize profitability.Yamaha Motor Corporation, U.S.A. is a growing and dynamic organization with superb products that includes motorcycles, outboard motors, ATVs, personal watercraft, snowmobiles, boats, power assist bicycles, outdoor power equipment, race kart engines, accessories, apparel, and much more! We are a company of enthusiasts and have passion for our products! The Manufacturing Engineer is responsible for evaluating existing processes, configuring and implementing new processes to increase efficiency, reduce cost, improve sustainability, and maximize profitability. He/She will lead the Continuous Improvement efforts and culture at G3 Boats. This person performs project engineering work requiring the application of standard and advanced manufacturing and quality techniques procedures and criteria in developing/improving processes and/or manufacturing systems, independently develops clear and specific objectives for given assignments that may require the investigation of several alternative solutions, develops thoughts and ideas into engineered solutions with approval from Management, effectively participates in a team setting to achieve results, and is responsible for leading moderate to large projects through the use of sound engineering practices.Essential Duties and Responsibilities:Evaluate and improve on processes in manufacturing systems.Maintain reliable and safe manufacturing systems while improving production rates, efficiencies, yields, costs and changeoversDevelop innovative solutions.Improve process capability and production volume while maintaining and improving quality standards.Collect, record, and transcribe data.Show results in reports.Develop and implement systems that optimize all phases of production process.Advise on corrective actions.Ensure projects are completed on time.Assess processes, take measurements and interpret dataManage cost and time constraintsPerform risk assessmentsProvide process documentation and operating instructionsIdentify, create, and apply manufacturing best practices and standardsLead process development projects of moderate to large scopeAct as a vital resource for technical questions related to manufacturing and quality processesContinually seek new manufacturing technology and processing methods that will improve the productivity, cost, quality, and agility of manufacturingDetermine manufacturing costs using established or customized methodologiesDevelop new manufacturing processes and technologies where appropriateServe, when required, as the team leader on cross-functional projectsLead manufacturing project teams and work with site personnel to ensure smooth implementation and transition of process development work into plant operationsRequirements:Proven work experience in mechanical and process engineeringExcellent technical skillsKnowledge of process related standardsFamiliarity with health and safety regulationsAnalytical thinker with interpersonal skillsHigh school diploma or equivalent GEDBachelor’s degree in Engineering, or a related fieldExperience with production/manufacturing system and process design based on Lean ManufacturingExperience with robotic welding operations/installations Skills/Knowledge: Advanced knowledge of engineering principles, especially related to manufacturing methods, equipment and tooling.Ability to solve complex problems and complete multiple projects, uses advanced problem- solving methods to make decisions.Applies proven technology independently.Strong oral and written communication skills. Comfort with operating in a challenging, fast paced environment Ability to meet and deal tactfully and courteously with fellow employees and vendors/contractors.Ability to pass a pre-employment physical, drug screen and background checkSheet metal manufacturing/fabrication experience preferred but not required.
Yamaha Motor Co. USA • Cypress, u.s.
Responsible for the design & development and complete delivery of the Lower Front system module. The work requires domain expertise in metal, plastic & composite components related to Truck lower front module such as Hood and Bumper systems and other structural and protection components. It is a key role in coordinating the operational work needed to ensure cross functionally anchored concepts and technical solutions meet defined product QDCF targets.Expert in plastic tooling design and manufacturing process.The role covers several aspects of the product development process and the deliverables are largely driven by Gates, Releases and Design loops.Core ResponsibilitiesResponsible for the development of products / parts and release of the solutions into the system with complete product ownership and tackling quality issues effectivelyPerforms design, testing/validation and/or development projects within area of assignment to fulfill the project set Quality, Delivery, Cost, Feature targets.Generate Value Engineering and Value Analysis (VA/VE) and Continuous Improvement (CI) ideas to reduce product costs and drive/support implementation as needed.Analyze component parts and assemblies to determine the best course of action required to resolve actual or potential problems and implement cost effective solutions.Support packaging engineers in packaging and installation tasks (e.g. technical reports, packaging investigations, DMU utilization)Build & follow component design time plan to meet project deadline.Responsible to independently drive Cross functional activities to close out development open points and achieve set project deliverables.Must have Global mind-set to collaborate and work with engineers mostly at Cab, Chassis, Styling, Vehicle Architecture, Verification & Validation team both Locally as well as Other sites within Volvo.Take ownership in development of engineering process & method documents (TR, guidelines, rules etc.)Contribute towards knowledge management within the area of assignment.
VolvoAuto Sweden Sa • Bangalore, India
Volt is hiring for entry level Manufacturing Engineers to work onsite with our customer, John Deere located in Waterloo, IA on a contingent assignment forecasted for 1 years. Looking for recent or new graduates!This position will rotate between 1st (7 am to 3:30 pm) and 3rd shift (10:30 pm to 7:00 am) so candidates must be open to both shifts. Overtime is likely, weekend and before shift starts.Manager is willing to see recent grad candidates with Technology/Engineering degrees. Manager is looking for 2021 grads that are located in the Midwest. This is a shop floor position, so candidates need to be comfortable in this environment. This position is approved for 1 year but may be extended beyond the current end date.This position is subject to US Export Controls. Must be a US Citizen or lawful permanent resident. Volt provides highly skilled contingent workers to local, national and international clients in all major industries. Volt has over 60 years of experience and is a leader in the industry. We work with many of the Fortune 500 and 1000 companies to provide workforce solutions.We have a talented and upbeat staffing team focused on the quality of your career. We have a long-standing tradition of developing lasting and mutually beneficial relationships with our employees.
Careerbuilder • Waterloo, U.S.
About the Position Global Manufacturing and Engineering Process teams are responsible to design, develop implement and standardize effective engineering/technical solutions for manufacturing systems, processes, equipment and automation that will ensure maximum efficiency of Goodyear manufacturing processes for our plants globally. This position is in the Automated Material Handling & Logistics Process Team and is responsible for supporting the specification, controls development, commissioning and plant support for equipment involved in the automated movement of materials and tires in the manufacturing plants. This will expand into other areas as required by team and business needs. ResponsibilitiesProvide equipment and process engineering expertise in Material Handling Support Capital Projects globally for the specification, development, check-out, installation, and commissioning of Material Handling equipmentDevelop and implement supervisory control and data acquisition solutionsProvide remote support for plant machine and supervisory level controls, occasionally in off hoursAssemble documentation and specification for automation control and/or interface programming for capital equipment installations and upgradesMaintain knowledge of HMI platforms, AC Variable frequency drives, controls and National Electric Code standardsCoordination of contractors and/or vendors and plant for commissioning of equipment.Participate in project scope development (internal & external), project facilitation/coordination through planning, installation and commissioning phases.Supplier development, compliance and management.Process optimization, improvements and upgrades.Troubleshooting and resolution of Material Handling Equipment and/or software application performance issues.Work with other Engineers to develop, maintain and implement specifications and global equipment standards Required Education and ExperienceMinimum Bachelor's Degree in Science, Technology, Engineering or Math (STEM)Desired PE, PMP or similar engineering / project management certifications.Minimum 4+ years’ experience Experience in a cross-functional assignment or projects.Experience with specification, procurement, and installation of equipment Experience with programming Rockwell and/or Siemens PLCs preferredEthernet IP and remote I/O systems knowledge preferredVisual Basic (VB6 and VB.NET), C#, C++, Python, PHP, xml, Java and sql programming skills preferred Linux, Windows Server knowledgeKnowledge of Message Oriented Middleware (Apache ActiveMQ/Camel/Karaf) desiredBasic understanding of pneumatic and hydraulic systems preferredExperience with AUTO-CAD or similar is preferredUnderstanding of safety compliance including CE desirableKnowledge of National Electric Code standards (NFPA-79, NFPA 70E) preferred Abilities and SkillsAbility to function in a team environment. Ability to interface cross-functionally with Goodyear and non-Goodyear associates globally from a variety of backgrounds.Achieve high quality results. Hold self-accountable for team performance. Influence others and assume management of assigned sub-projects. Address risk in assembling effective strategies. Drive positive change. Be aware of competitor capabilities. Participate in meetings with outside agencies and customers. Provide meaningful feedback and mentoring.Demonstrate and instill positive attitudes on peers. Demonstrate ability to plan and lead meetings at work group level. Initiate open dialogue. Offer constructive disagreement. Offer alternative solutions. Provide compelling technical direction and logical conclusions.Excellent communication (verbal and written) and technical documentation skills required.Willingness to travel up to 25%, domestically and internationally, and work occasional off-hours is required.
Goodyear Tire & Rubber Company • Akron, u.s.
Are you an Manufacturing Engineering Manager who loves the outdoors and wants to be in a rural location with plenty of space between you and your neighbors? We're looking for Engineering professionals with a background in Metal Fab, Machining and / or Welding and some experience with Paint and Coating would be a plus! Engineering degree required , BSME preferred Candidates with Off-Road Equipment, Heavy Equipment, Ag, Construction Machinery, Mining or other Heavy Industrial, Low Volume manufacturing environment experience will be the best fit. Relocation Assistance is available. Must be authorized to work in the U.S. without current or future sponsorship. Great team-oriented environment with respectful, forward-thinking, supportive leadership. This is a great locations for ATVing, Camping, Hiking, and other outdoor activities as well as Farmer's Markets, Festivals and let's not forget NASCAR racing close by! As Manufacturing Engineering Manager you will be responsible for 2 Manufacturing Engineers at this Welding, Fabrication and Machining operation. Lean, 6 Sigma and Continuous Improvement activities are critical in this Heavy Industrial, Low-Volume manufacturing environment.
Careerbuilder • Abingdon, U.S.
Nom de famille