Por favor selecciona al menos una posición o competencia

Lugar

Distancia

Cualquier
Cualquier

Posición o Cargo

Competencias

Educación

Cancela
Búsqueda

Resultados de la búsqueda

Filtro
Resultados para:
Género
Edad
DistanciaCualquier

Sterilization Engineer Principal (remote flexible)

JOB SUMMARY Responsible for providing sterilization-engineering support to Medline Industries worldwide operations. This role will assist/direct the design, installation, commissioning and start-up of facility sterilization process, abatement equipment [EO, Radiation], where needed, and ancillary supporting systems. Moreover, this role will drive projects with existing sterilization modalities that enhance Quality/Reg. Compliance, reduce operating costs through cost reduction, improved process control or improved machine reliability. RESPONSIBILITIES INCLUDE:Sterilization engineering support for greenfield and brownfield ethylene oxide sterilization facilities. This includes developing standardized URS, HAZOP/pFMEA/PHA, Risk Assessments, FAT, SAT and IQ documentation. With internal/external resources develop a sustainable model for sterilization facilities, minimizing bespoke costs.Lead stress testing of suppliers control system software and integration of controls w/process for a given sterilization modality.Engineering support for Sterility Assurance activities related to alternative sterilization methodologies, such as, but not limited: E[1]beam, X-Ray, Aseptic Processing, Moist and ry Heat. This will include performing in-house engineering feasibility studies, design and qualification specifications for said methods on an industrial scale. Drive approved alternative methods to completion.Review existing in-house sterilization equipment, to include Control System Software, and ancillary systems for gaps and improvement opportunities. Prioritize improvements in accordance with business risk. Provide technically competent solutions, to include time-line for completion and budgetary considerations. Depending on site/team skill set, either marshal/oversee resources or direct internal/external resources for improvements. Provide training as necessary to improve internal skill set.Provide engineering solutions at existing sites to automate/integrate pallet conveyance throughout in-house EO facilities, collaborating w/Engineering, Quality and Operations.Standardize means/methods at internal sterilization sites, brown or greenfield. Where applicable, control system hardware and software, instrumentation, calibration and maintenance activities are primary drivers. Insure each sites%26rsquo; critical sterilization component/equipment/software has a backup to minimize risk and insure business continuity.Support Sterility Assurance team with IQ/OQ/PQ, Risk Assessments, CAPA%26rsquo;s, Audits, etc.Benchmark internal/external sterilization modalities, insuring best practices for Medline owned sterilization equipment/facilities.Working understanding of US and International regulations associated with various modes of sterilization, specifically EO.This is a high-level individual contributor role. May be involved in hiring staff, recommending pay increases, performing performance reviews, training and development of staff, estimating personnel needs, assigning work, meeting completion dates, interpreting and ensuring consistent application of organizational policies.COVID-19 Vaccination Please be aware that Medline requires all employees starting in this position to be fully vaccinated against COVID-19. This position will require the successful candidate to provide proof that they are fully vaccinated by their start date. Medline is an equal opportunity employer, and will provide reasonable accommodations to those individuals who are unable to be vaccinated for COVID-19 consistent with federal, state, and local law. EDUCATION:Bachelor's degree in mechanical engineering, biomedical engineering, electrical engineering, or equivalent mechanical/electrical degree. A Life Science degree with a minimum 10 years demonstrated professional engineering roles/expertise is acceptable. WORK EXPERIENCE:A minimum 10 year sterilization equipment experience required. SME in ethylene oxide sterilization equipment (primary)/processes (desirable) from an engineering perspective. Secondary expertise in other methodology is desirable, such as, but not limited to: E-beam, X-Ray, Gamma, Dry Heat, Moist Heat, Aseptic or novel sterilization methods.Preferred 10+ years hands-on-of experience in a regulated industry, with sterilization engineering, EO required, Dry or Moist Heat desirable.A Controls/Automation background is required; 8+ years%26rsquo; experience with Sterilization Software Programming & Integration.Proficiency in AutoCAD required, as well as Microsoft Suite [Word, PowerPoint, Excel, and Project]. Statistical analysis desirable using Minitab or equivalent.Ability to work effectively in cross-functional teams. Ability to work independently and manage multiple tasks and priorities.Position requires travel up to 30% of the time for business purposes (domestic and international).Sterilizer equipment, and Controls Hardware and Software. Relevant standards associated with EO modality.Benchmarking and project management skills to develop scope, capital cost, and timelines in support of capital projects.

Careerbuilder • Northfield, U.S.

-

Electrical Engineer / Power Engineer

Jacobs Energy and Power Solutions Group has rewarding opportunities for electrical engineers focusing on power generation and distribution applications. This position is available in New Orleans or Baton Rouge, Louisiana. In this role, you will be responsible for Energy and Power Solutions Group related design work for varied municipal and private clients including power generation and distribution, combined heat and power, and utility distribution on multiple projects of various sizes. Here’s What You’ll Be Doing:Electrical system analysis, design, equipment procurement, construction support, and commissioning support related to electrical systems for power generation applicationsElectrical system analysis and design of project power system interconnection to utility power system and associated equipmentSmart device, also commonly referred to as intelligent electronic device (IED), integration into electrical systems designEquipment specifications, procuring, and factory acceptance testing engineered electrical equipment including switchgear, transformers, electrical system control equipment, and various other electrical systems elements as required for project designSystem modeling and calculations including lightning protection, grounding, load flow, voltage drop, short circuit, and arc flash analysisProtective relaying schemes including development of coordinated relay settings and automation for advanced networked electrical protection systemsDevelopment of construction document packages including required specifications and drawings that will be utilized for bidding and constructionCommunication and coordination with Client, Contractors, and outside partiesGrowth into supervision of design and production team resourcesB.S. (minimum) in Electrical Engineering is requiredProfessional Registration (P.E.) is requiredDetailed experience in the development, design, procurement, engineering support of construction, and engineering support of commissioning of heavy electrical, utility and heavy industrial, power systems; medium voltage experience, at a minimum, is requiredIdeally, you’ll also have:Industrial power plant electrical systems evaluation and design; related experience in chemical, petroleum, and other heavy industrial process plants is acceptableHeavy industrial substation design, including relay protection and utility interface interconnection and agreements with utility companiesProtection system design, including associated IED automation with demonstrated experience configuring IEDs in native IED syntaxElectrical system modeling using ETAP, SKM, or similar modeling softwareTask lead experience including scope and fee development, and project execution while meeting established schedule and budget requirementsAbility to direct the production of design packages using design automation tools such as 3D AutoCAD, Revit, or equivalentDesign for turbine generator electrical system in excess of 10MWSome travel required

Careerbuilder • New Orleans, U.S.

-

Retail Merchandising Display Manager, Baking

Position SummaryNestlé USA’s Baking division brings together a portfolio the nation’s most iconic baking brands – Nestlé Toll House, Carnation, and Libby’s. This winning product portfolio has a rich history of delighting bakers across the nation, making meaningful connections a little bit warmer and more memorable, and giving consumers the best possible experience. As part of Nestlé’s mission to enhance the quality of consumers’ lives, we’re poised for strong sustained growth and are excited to offer career opportunities that will drive growth and go-to-market strategies. It has never been a more exciting time to join.The Nestlé Baking division is looking to welcome a critical Retail Merchandising Display Manager role on the seasonal marketing team. This individual will reinvent and optimize the merchandising display experience to deliver a flawless experience for the shopper, the customer, and Nestlé. You will bring high-impact display programs to life – ideating and innovating against new opportunities, reimaging displays, and enhancing current displays – to drive sales, win at first moment of truth, and persuade shoppers to select Nestlé’s winning brands. This role will be a critical driver of unrelenting commercial excellence.The Retail Merchandising Display Manager will create brand-right display concepts to better serve our customers’ needs and consumer consumption behaviors. Should constantly pattern the external market to bring insights and brand-right recommendations to the team. Accountable for creating and delivering impactful presentations used to influence leadership. Consistently demonstrates a passion for our consumer and customer, fosters a collaborative, team-oriented work environment, and is agile in an environment of constant changeRESPONSIBILITIES: Strategy and execution of merchandising displays across the Bakery Sweets portfolio of brands (Nestlé Toll House, Carnation, and Libby’s) and products (morsels, cookie dough, milks, and pumpkin)Lead front end planning and implementation for displays as well as business optimization and analysisEstablish best practices and develop innovative strategies to make execution seamlessIdentify products to support and display in secondary merchandising display locationsEstablish optimized product assortment for display units to maximize sales and forecast velocities to deliver simultaneous sell down of display items Lead relationship with strategic vendor partner(s) that design, create, build, and deploy merchandising displaysParticipate in material/finish selection, research and development work in collaboration with Procurement teamPrepare presentation materials and deliver compelling presentations to partners/leadershipIdentify and propose innovative solutions to resolve issues that impact project schedule, cost or design integrityMonitor and optimize business performance against shipment and consumption targets, etc.Travel to provide on-site design support, become familiar with display build details, and evaluate end resultEXPERIENCE & EDUCATION: Bachelor’s degree 4+ years experience in retail Merchandising Display design in a corporate environment or design firm; demonstrated strong industry knowledge and expertise3+ years experience in forecastingExperience in technical packaging or display design & Seasonal Experience, a plus Proficient in Sketchup, Microsoft Suite, In Design and/or Photoshop

Nestlé S.A. • Arlington, U.S.

-

3D Modeler, CAD Engineering

What you will do:                  As a 3D Modeler, you'll be a trusted member of our team reporting to the CAD Engineering Manager. You will collaborate with Design teams to generate high-quality 3D assets to advance our Digital Product Creation initiative. How you will do it: Utilize your 3D digital modeling skills to contribute in the creation of accurate 3D footwear models.Ensure that critical product development dates are met.Manage and maintain the digital library of 3D assets.Assist in executing our additive manufacturing process.What success looks like: We will inspire and equip a new generation of adventurous doers to step outside and move the world forward.Free To Be, Inclusion & Diversity As a purpose-led, performance driven company, we strive to foster a culture of belonging based on respect, connection, openness and authenticity. We are committed to building and maintaining a workplace that celebrates the diversity of our associates, allowing them to bring their authentic selves to work every day.Skills for Success Years of Related Professional Experience: A minimum 3 years of relevant CAD work experience (2 additional years in lieu of a degree)Educational Position Requirements:Bachelor’s degree in engineering, Industrial Design or related fieldA formal education and subsequent undergraduate/graduate degrees are nice to have, but we are most interested in your total experience and professional achievements.What we expect you already know: Proficient in 2D CAD, Adobe Photoshop and Illustrator.Demonstrated proficiency using digital 3D Design applications (i.e. Maya, Modo, Rhino, Solidworks)Must be capable of working in a team environment.Ability to manage multiple projects during the product creation cycle.Ability to travel domestically and internationally once or twice a year

Timberland Company • Portsmouth, u.s.

-

Mechanical Design Engineer

Professional Engineering Consultants (PEC) was founded more than a half century ago as a full-service consulting firm providing mechanical, electrical, structural, civil, transportation, water and wastewater, land development, planning services; a broad range of field work including survey, geotechnical, construction inspection, testing capabilities; as well as the all the essential professions it takes to make it all come together for our public, private, and industrial clients. Headquartered in Wichita, Kansas, with additional locations in Kansas, Missouri, Oklahoma, and Colorado, our projects take us across the nation and around the world. At PEC, our employees have a passion for the communities where they work, live, and play. If you are looking for a career path that provides the opportunity for you to reach your full potential, PEC is the place to be. PEC's team culture is built on our ability to solve problems through a collaborative process. We elevate each other by aligning personal strengths to professional development. Our engineers and staff do not just sit behind desks. We work together with other teams, make site visits, take tours, meet face-to-face with the clients, establish big goals, and set out to achieve them. Qualifications: • A minimum of a B.S. Degree in an appropriate field of study from an accredited college. • Passed the Fundamentals of Engineering Exam; Intern Engineer (I.E.) Credentials are expected. • Excellent oral and written communication skills for client contact. • Meet and understand critical deadlines through efficient time management and effective communication. • Internship, study or full-time experience in the HVAC industry is highly recommended. • Experience with Revit is a plus. Position Duties and Responsibilities:• Perform engineering design, coordination with design staff with plan production, and construction administration on projects.• Performs design computations by hand and by computer software. Uses experience, education,and judgement to make informed decisions. Retains knowledge and builds on previous experiences to increase capabilities in breadth and complexity.• Organizes multiple tasks and completes them in an orderly fashion.• Effectively communicates and coordinates with the Project Engineer and other PEC Divisions in order to complete design tasks on numerous projects.• Make formal presentations to organizations, private industry, and government agencies.• Ability to organize and handle multiple project assignments.• Prepares quantity take-offs for use in construction cost estimates and engineering fee estimates.• Reviews project submittals for compliance with design checklists and drafting standards.

Careerbuilder • Kansas City, U.S.

-

Architectural Designer

Job DescriptionWe need more hands-on-deck in our Architecture and Interiors discipline: Our book of business continues to grow rapidly and the caliber of project work demands a full team of talented designers who can take on a whole range of unique architecture and design challenges. The most successful candidates can deliver design excellence, attention to detail, organization and time management skills, and the potential to grow into leadership roles over time. Not every designer needs to deliver on all of these attributes at once, but this is the mix of talent we seek. If you think you can add something special to our team and our practice, we would love to hear from you. This role is going to be in Beverly, MA however relocation assistance may be provided to the right candidate! What you bring:Design chops you've got the vision, creativity, and skills.Collaborative spirit the idea of interdisciplinary teamwork gets you excited.Opinions you have them and value sharing them with others.Passion you have a healthy dose of ambition for yourself, your team, the work (and the firm you'll come to love).Proactive resourcefulness you're energetic and positive about solving problems and take initiative to find a way to 'yes'.Growth-orientation you're curious and want to find greater ways to impact the world around you.Humanistic sensibility you design for people and you generally enjoy working with others. What you'll do:Develop and coordinate detailed design concepts.Perform production functions: drafting, documentation, and model creation.Prepare design presentation packages.Perform assignments including basic plans, elevations, renderings, square foot calculations, materials investigations, and understanding where those fall within a project. Experience and Education:A Professional Degree in Architecture from an accredited program.3+ years of experience. High level of proficiency in:Communication and Presentation: Adobe and Microsoft suites, rendering, physical model making.Documentation: Revit and AutoCAD.Design: Rhino, SketchUp, Grasshopper, etc.LEED AP preferred.

Craft Recruiting • Beverly, U.S.

-

Senior Concept Modeler, Digital Product Creation

Senior Concept Modeler, Digital Product CreationYou'll be a trusted member of our Global Footwear Design Team, reporting to the DPC Director, (Newly formed Digital Product creation Team). This role will have cross-functional responsibilities. The Senior Concept Modeler is an integral part of the Design and product creation function and responsible for driving digital product creation from ideation to Delivery. You will be an expert in the use of digital tools to help visualize and enable the creation of innovative concepts and designs. You will collaborate with other members of the design team including product development, materials and merchandising. You will create and present assets that effectively communicate design intent and proof of concept. This role provides technical expertise and process support to Design, Merchandising, Engineering, Innovation and Product Creation teams.How You Will Make a Difference What you will do: Design: Initiate and provide focused, functional, and innovative footwear ideas that are appropriate for the Timberland brand in a timely manner. Leads with a Design First point of view to bring innovation and brand right product to the marketplace Use creative problem-solving skills to assist Product Management and Development teams fulfill product and calendar objectives quickly and efficiently. Travel: Trips to regional and global locations to present and execute design concepts. Focus on travel specific to business (accounts), insight (consumer and market), and inspiration (trade and trend shows). Innovation and Conceptualization: Create three-dimensional models illustrating new, unique product ideas and concepts which meet the expectations delineated in the product brief. Documentation and Communication: Maintain and provide a clear form of documentation and communication with team members in order ease the transfer of the design solutions from concept through commercialization. Ability to partner with Product Management and Development teams with an openness to feedback and a focus on collaboration to achieve the best result. How you will do it: Utilizing your 3D digital modeling skills to contribute in the creation of accurate 3D assets. Ensuring adherence to strict product creation timelines. Reducing physical prototypes and samples, reducing the calendar timelines and helping Timberland become a more sustainable company by enabling new business processes Collaborating with other team members, share best practices and methodologies, and build an innovation-minded team that can be the DPC Centre of Excellence for all of VF What success looks like: As Timberland Design evolves, we will boast an industry-leading design community and an agile, inclusive creator culture that is grounded in creativity, progressive thinking, and collaboration. You will be an essential part of this mission.Free To Be, Inclusion & Diversity As a purpose-led, performance driven company, we strive to foster a culture of belonging based on respect, connection, openness and authenticity. We are committed to building and maintaining a workplace that celebrates the diversity of our associates, allowing them to bring their authentic selves to work every day.Skills for SuccessYears of Related Professional Experience: 5-7 yearsEducational Position Requirements:Bachelor’s degree in Art and Design, Industrial Design, Fashion, or related fieldA formal education and subsequent undergraduate/graduate degrees are nice to have, but we are most interested in your total experience and professional achievements.What we expect you already know: With your skills and passion for product and 3D capabilities, you have in depth experience with efficient and advanced modelling techniques, knowledge of Digital product Creation and emerging tools. technical skills to determine aesthetic and functional design solutions and help overcome design challenges. You also have a strong aesthetic sensibility and excel at translating abstract concepts into fully realized form.  in continuous improvement, information monitoring, decision making, planning and organizing and being customer focused, your talent for building partnerships with communication, gaining commitment and leveraging cultural diversity will contribute to the team’s success. You are also adaptable with innovation and innovative thinking while continuously learning and driving for results.Knowledge of CAD design applications such as Adobe creative suite, Illustrator, Photoshop, and Microsoft Office Proficiency in 3D, concept and polygonal and/or surface modeling Advanced Skills in using digital Design applications (i. e. Maya, Modo, Rhino SolidWorks, Roman’s Cad, Vray, ZBrush, KEyshot,) In depth knowledge preparing 3D data for prototyping and experienced in creating conceptual prototypes Possess an in depth understanding of digital creation market trends and new technologies What we will teach you: As a member of our Global Footwear Design Team you will be a part of our inclusive creator culture, where all ideas are encouraged and expected. You will be both a teacher and a learner in all that you do.VF Guiding Principles: Live with Integrity, Act Courageously, Be Curious, Act with Empathy, and Preserve.

Timberland Company • Portsmouth, u.s.

-

Plastics Engineer

JOB DESCRIPTIONWe are a billion-dollar supplier and manufacturer of Life Science equipment that is experiencing tremendous growth both internally and through acquisition. As such, we are expanding our manufacturing operations. We make a line of medical supplies used by laboratories and pharmaceutical companies. We are looking for someone with a strong background in Polymer Process Engineering to be part of a new product development group. You will scale up and validate plastic forming processes used to manufacture new products. You will served as a subject matter expert and oversee work in our lab. 3 Awesome reasons to work here :Premier global manufacturing company making a difference in people's livesMultiple paths for career advancementGreat benefits package What you will be doing Support development of new products and drive the development processes for plastic forming processes (primarily injection molding) and secondary processes.Identify and provide plans to mitigate risksPlan and carry out experiments, provide data analysis to define new process parameters and control limits through use of rigorous statistical methodsDevelop resolution to complex technical problems and execute solutions within developed timelines. Research, identify, and propose best in class solutions.Lead design reviews for processes developedInterface with outside vendors that provide materials or services for assigned projects.Ensure Intellectual Property management process is followed, and any intellectual property developed as part of a project is properly documented. What you need for this Position :Bachelor's degree in Polymer Science, Plastics, Extrusion Engineering, Materials Science, Chemical Engineering or related5+ years of Plastics Engineering experiencePolymer Process Development experience with a focus on going from customer needs to marketed solutionProficient in injection molding process development including the use of scientific injection moldingWorking knowledge of statistical software such as MinitabExperience with secondary process techniques (Example: plastic part assembly methods) We'd be really excited if you have some of these additional skills and experiences:Experience with CAD drafting (Solidworks)Experience with stage gate process following ISO 9001 or ISO 13485, cGMP, Design ControlsExperience with disposable polymer products used in Life Science What's in it for you: This is a position designed for you to use your Injection Molding expertise, lead projects and quickly advance your career within the company through multiple possible career paths. In addition to a competitive salary ($90 - $125K) we offer a complete benefits package including pension, 401K, and medical benefits.

Craft Recruiting • Biddeford, U.S.

-

Agricultural Engineer

The Agricultural Engineer with Animal Health International partners with our sales team in providing automation solutions in feed manufacturing to our new and existing customers. The Agricultural Engineer will develop automation solutions for customer feedmill operations, design and implement dispensing equipment solutions, and provide technical support for systems installed in customer facilities. This position will be responsible for supporting AHI dispensing equipment manufacturing and installation projects at customer sites.The Agricultural Engineer will support AHI business goals through partnering with our sales team and customers in providing automation solutions for feed manufacturing. The Agricultural Engineer will also develop processes for feed mill operations, design and support dispensing systems, and provide technical support service to our customers.Essential FunctionsEquipment Design and ManufacturingResponsible for developing hardware and control solutions for dispensing products.Develop and maintain efficient equipment assembly and test procedures in manufacturing.Create mechanical and electrical drawings using Solidworks.Research, design, and implement improvements to existing and new equipment/control processes.Test and verify accurate machine operation with new products. Work directly with manufactures on new products.Feed Mill ProjectsResponsible for developing automation processes and control solutions for beef and dairy feed mill operations.Provide technical support and consulting to customers on feed batching and mill operation.Develop batcher and mill operational specifications for control system development.Provide on-site support for installation and support of control solution projects.Coordinate with contractors on mill changes. Manage control system install projects.Service SupportProvide on-site support to Field Service Technicians and customers to maintain proper operation of equipment.Train personnel in all technical aspects of the equipment operation: trouble-shooting, service requirements, etc.Proficiency in ration calculations and data entry procedures.FDAApply FDA GMP’s to process and equipment design for beef and dairy operations.Support and train personnel in FDA regulations and procedures.Perform required assays and other testing as directed by FDA regulations and/or company policies and procedures.Working ConditionsPhysical Demand:Lifting or carryingOccasional or frequent moderate physical activityUp to 50 poundsSitting or standingContinuous moderate or occasional heavy physical activityClimbingContinuous moderate or occasional heavy physical activityStoop, bend, or crawlContinuous moderate or occasional heavy physical activityEnvironment Factors:Feedlot and Dairy customer environmentExtreme hot/cold temperaturesHigh voltageDirt or dustFumesSmokeLoud noisesHazardous chemicalsHazardous machineryTravel and On-Call:This position requires moderate travel (50%) in a national area. For this position being on-call is required.Minimum Qualifications:   •      Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or equivalent experience.•      3-5 years of mechanical/electrical experience.•      Mechanical/electrical design and drafting abilities using Solidworks software.•      Proven ability in process design and automation systems development.•      Proven ability in process analysis, problem solving, and implementing solutions in a production          environment.•      Extensive experience in weighing systems, PLC systems, motor drives (frequency/DC), and other       industrial automation devices.•      Demonstrated success in prioritizing and time-management.•      Oral or written communication skills.•      Valid driver’s license and clean driving record.•      Proficiency with office productivity tools such as Microsoft Excel, Word and PowerPoint. Preferred Qualifications:•      Bachelor's Degree in Electro/Mechanical Engineering•      Feed mill operation with steam flaking of grain•      Agricultural work experience in the beef and dairy industries•      Hardware and control system design

Careerbuilder • Greeley, U.S.

-