General Description: As a Process Operator, you will gain hands-on experience producing high-quality products in one of Goodyear's Chemical manufacturing plants. Goodyear Chemical is a division of The Goodyear Tire & Rubber Company which manufactures and markets rubber-related chemicals for various applications. You will also become familiar with safety, quality, and how to be successful in a team environment. We encourage you to allow us to invest in your success as you invest in ours; apply today! Responsibilities will include, but not be limited to: Perform routine operation of process and mechanical equipment. Control, monitor and adjust as necessary Troubleshoot process, product quality, safety and environmental problems and identify equipment requiring maintenance Review, analyze, and interpret lab data, distributive control monitoring information, log information from previous shift(s) and from the field, AVO (avoid verbal order) instructions, etc. to identify problems and make decisions Clean and maintain a safe work environment Abide by standard work procedures and job safety standards, including required PPE Perform a variety of manual tasks in varying temperatures for extended periods of time, which may include lifting light to heavy materials, climbing, standing, squatting, bending, and working at heights and/or confined spaces when applicable Adhere to Goodyear's attendance policy Communicate clearly and concisely, both orally and in writing Understand and follow all instructions, both orally and in writing Basic Qualifications: HS Diploma/GED Must be at least 18 years of age Must be legally authorized to work in the US without company sponsorship now or in the future Must be able to successfully complete all pre-employment criteria Ability to work any and/or rotating shifts, weekends, holidays, or overtime if applicable Basic computer skills Preferred Qualifications: AAS in Process Operations Technology Process Operations Technology Certification Previous manufacturing experience with basic knowledge and understanding of mechanical principles Previous experience as a Process Operator in the chemical, rubber or petroleum industry Distributed Control System (DCS) Console Board Operations experience Vocational/technical school and/or coursework Apprenticeship program within a mechanical discipline Previous military service experience within a technical specialty Demonstrated ability to understand and apply mechanical concepts and principles to solve problems Experience adhering to industry-specific safety standards Candidate Criteria: Self-motivated: demonstrates appropriate initiative with or without direct supervision Hard worker: someone who works diligently to get tasks done in a timely and safe manner Adaptability: the ability to make changes, and to be successful in changing environments Team player: an associate who can be counted on to assist the company in being successful Ability to review, analyze, and interpret information, identify problems and make decisions in routine and non-routine situations Commitment to working safely May be required to serve on the Emergency Response Team.Pay Rate: There is a three-year pay rate progression with this position. Starting rate of pay = $19.0012 months of service = $19.7524 months of service = $20.50
Goodyear Tire & Rubber Company • Houston, U.S.
Automation and Controls Engineer - SiemensLocation: Hyannis, MA 02601 Founded over 60 years ago, and still innovating to this day, we are a leading provider of unique end-to-end automated solutions for the packaging and management of our client's products. Primary Duties & Responsibilities: Design automation controls systems including power distribution, SCCR requirements, digital and analogue I/O requirements, and motion control systemsProgram PLCs, HMIs, and Motion systemsDevelop knowledge of customer application requirements and propose equipment controls design to satisfy those requirements.Complete design, test and implementation of industrial automation systems.Prepare necessary documentation including wiring schematics, assembly drawings, bills of material and panel machining drawings.Interface with Manufacturing to ensure equipment conforms to engineering design and customer specification.Participate, in conjunction with sales staff, in sales presentations o or the prospect's location as required.Maintain complete and accurate records of all relevant information, by project.Adhere to all safety and standard operating procedures.Assist with the operation of manual documentation as it relates to the controls.Perform Safety Risk Assessment and design control system in accordance with resultsEducation and Experience: 5+ years' experience in implementing, optimizing and validating controls systems including PLC's and data acquisition systems.Machine safety system designDegree in Electrical Engineering or related discipline.AutoCAD experienceSiemens TIA Portal (V16 or higher)1516 cpuET200 distruibuted IOProfinet communicationSafety PLCServo Drive(Sinamics S120)Commissioning and Control from PLCHMI DevelopmentComfort panelTIA Portal programmingHMI Scripting of PLC to HMI communicationsRecipe HandlingBase Salary: 85-105k negotiable depending on experience + strong benefits + pto
Craft Recruiting • Providence, U.S.
Sony AI America (SAIA) is seeking highly motivated, self-driven AI Engineers with expertise in various AI tools, particularly deep reinforcement learning (deep RL). We’re currently looking for smart, enthusiastic people who want to join our team of world renowned researchers as we push the boundaries applying AI in support of human creativity. In this role, the successful candidate will apply reinforcement learning and other forms of machine learning to challenging domains like computer games, robotics, and gastronomy. Sony AI America is a remote-work organization – location is flexible.Responsibilities:Write code to support research programs and contribute to our AI codebaseImplement and test AI algorithmsSetup, execute, and analyze experiments applying deep RL to target domainsEvaluate and integrate external AI libraries and toolsWork closely with AI researchers and other programmers on ambitious demonstration projects Qualifications:Experience implementing AI algorithms, usually in pythonExperience designing and debugging neural networksPassion for making AI work in realistic domainsExcellent written and oral communication skills, as well as interpersonal skills including the ability to articulate to both technical and non-technical audiences
Sony Electronics Inc. • New York, U.S.
Our commitment to R&D and expertise in materials science allows us to be a leader in Science and Technology. The products we make keep our country safe, touch virtually every automotive manufacturer, make the world greener, empower wireless communications and change the world. Growth and market demand have us ramping up our manufacturing capabilities in Blacksburg, VA. We are looking for a Controls Engineer to support manufacturing operations, production floor controls equipment & instrumentation, measurements equipment and image processing software/technology. We will assist a talented engineer with relocation. What you will be doing Using your background in electrical controls and manufacturing (ideally with some measurements experience), you will support new equipment builds and equipment transfer.Support troubleshooting, updating, and enhancing existing plant electrical/control systems.Provide support with motion control systems, robotics systems and inspections systemsImplement hardware and software components for controls systems.Participate in receivership of electrical/control systems delivered to the plant, during design, fabrication, integration and testing, installation, and production start-up. Ensure training of plant personnel and technology transfer.Lead projects for existing systems and new plant-specific controls equipment. What you need for this Position Bachelor of Science in EngineeringAt least three years of Electrical Controls ExperienceExperience with Rockwell PLCs (ControlLogix)Fundamental understanding of electrical design practices, machine/motion control systems, electro-mechanical systems, robotics, programming and system integrationAbility to design control systems, do programming and integrate close loop control systemsExperience with RSView and PanelView HMIsUnderstanding of National Electric Code NFPA 79, NFPA 70e, ANSI and IEC electrical symbolsWe'd be really thrilled if you have any of the following:Experience collaborating with IT, Process and Mechanical EngineeringManufacturing experienceSome leadership experience and a desire to grow as a technical leaderExperience with Vision SystemsRobotics experience.
Craft Recruiting • Blacksburg, U.S.
JOB SUMMARY Responsible for providing sterilization-engineering support to Medline Industries worldwide operations. This role will assist/direct the design, installation, commissioning and start-up of facility sterilization process, abatement equipment [EO, Radiation], where needed, and ancillary supporting systems. Moreover, this role will drive projects with existing sterilization modalities that enhance Quality/Reg. Compliance, reduce operating costs through cost reduction, improved process control or improved machine reliability. RESPONSIBILITIES INCLUDE:Sterilization engineering support for greenfield and brownfield ethylene oxide sterilization facilities. This includes developing standardized URS, HAZOP/pFMEA/PHA, Risk Assessments, FAT, SAT and IQ documentation. With internal/external resources develop a sustainable model for sterilization facilities, minimizing bespoke costs.Lead stress testing of suppliers control system software and integration of controls w/process for a given sterilization modality.Engineering support for Sterility Assurance activities related to alternative sterilization methodologies, such as, but not limited: Ebeam, X-Ray, Aseptic Processing, Moist and ry Heat. This will include performing in-house engineering feasibility studies, design and qualification specifications for said methods on an industrial scale. Drive approved alternative methods to completion.Review existing in-house sterilization equipment, to include Control System Software, and ancillary systems for gaps and improvement opportunities. Prioritize improvements in accordance with business risk. Provide technically competent solutions, to include time-line for completion and budgetary considerations. Depending on site/team skill set, either marshal/oversee resources or direct internal/external resources for improvements. Provide training as necessary to improve internal skill set.Provide engineering solutions at existing sites to automate/integrate pallet conveyance throughout in-house EO facilities, collaborating w/Engineering, Quality and Operations.Standardize means/methods at internal sterilization sites, brown or greenfield. Where applicable, control system hardware and software, instrumentation, calibration and maintenance activities are primary drivers. Insure each sites%26rsquo; critical sterilization component/equipment/software has a backup to minimize risk and insure business continuity.Support Sterility Assurance team with IQ/OQ/PQ, Risk Assessments, CAPA%26rsquo;s, Audits, etc.Benchmark internal/external sterilization modalities, insuring best practices for Medline owned sterilization equipment/facilities.Working understanding of US and International regulations associated with various modes of sterilization, specifically EO.This is a high-level individual contributor role. May be involved in hiring staff, recommending pay increases, performing performance reviews, training and development of staff, estimating personnel needs, assigning work, meeting completion dates, interpreting and ensuring consistent application of organizational policies.COVID-19 Vaccination Please be aware that Medline requires all employees starting in this position to be fully vaccinated against COVID-19. This position will require the successful candidate to provide proof that they are fully vaccinated by their start date. Medline is an equal opportunity employer, and will provide reasonable accommodations to those individuals who are unable to be vaccinated for COVID-19 consistent with federal, state, and local law. EDUCATION:Bachelor's degree in mechanical engineering, biomedical engineering, electrical engineering, or equivalent mechanical/electrical degree. A Life Science degree with a minimum 10 years demonstrated professional engineering roles/expertise is acceptable. WORK EXPERIENCE:A minimum 10 year sterilization equipment experience required. SME in ethylene oxide sterilization equipment (primary)/processes (desirable) from an engineering perspective. Secondary expertise in other methodology is desirable, such as, but not limited to: E-beam, X-Ray, Gamma, Dry Heat, Moist Heat, Aseptic or novel sterilization methods.Preferred 10+ years hands-on-of experience in a regulated industry, with sterilization engineering, EO required, Dry or Moist Heat desirable.A Controls/Automation background is required; 8+ years%26rsquo; experience with Sterilization Software Programming & Integration.Proficiency in AutoCAD required, as well as Microsoft Suite [Word, PowerPoint, Excel, and Project]. Statistical analysis desirable using Minitab or equivalent.Ability to work effectively in cross-functional teams. Ability to work independently and manage multiple tasks and priorities.Position requires travel up to 30% of the time for business purposes (domestic and international).Sterilizer equipment, and Controls Hardware and Software. Relevant standards associated with EO modality.Benchmarking and project management skills to develop scope, capital cost, and timelines in support of capital projects.
Careerbuilder • Northfield, U.S.
Job SummaryUnder general supervision, serves as lead person for field crew implementation of special assignments or sub-tasks related to the construction of landfill gas collection or other environmental pollution control systems. Relocation assistance available.Essential Duties and ResponsibilitiesInterpret project plans and specifications.Oversees portions of larger construction projects including pipe fusion/installation, extraction well drilling and installation, construction of blower/flare station components, installation of pumps, sumps, etc.Assists in drilling operations. Assists in completing wells during drilling projects by lifting and carrying materials such as bentonite and gravel and placing or shoveling the materials into the drilled gas well.Enters excavations to fuse pipe, install gas system piping, and install leachate or condensate piping.Enters manholes, sumps, or other confined spaces to assist in the installation of new gas system or leachate/condensate system piping.Assists in the repairs of leachate and condensate lines by cutting piping and/or removing or draining leachate or condensate liquids.Operates power saws and drills to connect and cut piping and wellheads, and to cut slots into new or existing gas system piping.Applies glues and primer to gas and leachate system piping to repair or connect piping.Operates heavy machinery such as rough terrain forklifts, excavators and backhoes to excavate and move landfill waste and soil for installation of gas system and leachate piping.Receives materials, maintains material inventory, prepares receiving reports, and reviews time cards and expense reports for assigned crew.Implements health and safety requirements and generates supporting documentation. Participates in the SAFE process by making observations and providing employee feedback.Maintains daily logs of project progress.Tracks and maintains construction equipment and tools.Calls off rental equipment when no longer needed Review site checklists. Inform Project Manager of any major changes or concerns, and address the items.Participates in monthly tailgate Health and Safety meeting. Participates in monthly Health and Safety (SOP) training.Prepares daily logs and reports for work performed on sites during workday.Actively participate in the SAFE process by making observations, review and assist in the development of the project health and safety plans including the associated Job Task Safety Analyses.QualificationsMinimum of 2 years of landfill gas construction preferred or 2 years of related construction experience required.Prior successful oversight of projects as a Foreman, Senior Technician, or Operator.Comprehensive knowledge of excavation or pipe installation practices.Ability to read and understand plans and specifications.Valid driver' s license with driving record in good standing required.40 hour Health & Safety, 8 hour Supervisor, OSHA 29 CFR 1910.120, Confined Space Entry, and Trenching Excavation Safety training preferred.Meet physical requirements for driving (pick-up truck), lifting and carrying equipment/mechanical components (up to 50 lbs. unassisted), hand excavation/digging (using shovels/picks), carrying and climbing ladders, operating and working from man lifts, operating electric tools, (drills, saws, etc.), using hand tools, (screwdrivers, wrenches, hammers, etc.), and providing services under various weather conditions.
Careerbuilder • San Diego, U.S.
The GNC Engineer will Design, develop, implement, verify and test algorithms and software and simulation tools to perform guidance, navigation and control of marine vehicles.Yamaha Motor Corporation, U.S.A. is a growing and dynamic organization with superb products that include motorcycles, outboard motors, ATVs, personal watercraft, snowmobiles, boats, power assist bicycles, outdoor power equipment, race kart engines, golf cars, accessories, apparel, and much more! We are a company of enthusiasts and have passion for our products!Yamaha has an excellent opportunity for an Perception Software Engineer to join our Marine team in Kennesaw GA. Job Summary (outline in one to three sentences the overall responsibilities of the role):The GNC Engineer will Design, develop, implement, verify and test algorithms and software and simulation tools to perform guidance, navigation and control of marine vehicles. Guidance functions include the formulation of specific equations to achieve a desired position and orientation. Control design consist of the development of the control laws and software requirements to ensure stable, robust and comfortable navigation. Candidate will work with a world-class engineering team focusing on marine robotics and autonomy.Essential Job Duties / FunctionsWork with software engineers to develop and maintain simulation environment for watercraftCo-develop a formal system identification pipeline for multiple boat and engine configurationsPrototype and test algorithms in simulation, then implement on a real system.Work cross-functionally with technical teams to execute functional testing, system integration verification and performance checks through automated simulation and sea trials.Test, debug, and maintain reliable, safe, and production quality codeParticipate in water testing, document and communicate bugs and issues encountered during testing.Find new ways to explore the water and create amazing experiences on the water for our customersParticipate as a multi-disciplinary engineering team member including team meetings, stand-ups, quality reviews, code reviews.Note: Additional information can be added as an Appendix.Decision-Making Responsibility (describe the degree of autonomy and authority in project/work activities and supervision expectations)This candidate will work under supervision from Autonomy Software EngineerQualifications (minimum and preferred experience, education, and/or certifications required to perform the role):MS or PhD degree in aerospace, physics or an engineering discipline with 3+ years of relevant experience5+ years of experience in C++ and Python software development3+ years of experience developing autonomy software in complex integrated dynamic hardware applications. e.g., path planning, obstacle avoidance, sensor fusion, map building, etc.Experience developing Matlab Simulink modelsFamiliarity with Linux environment and version control (Git)Experience implementing and deploying control laws in physical systems, maneuver regulation, filtering, fault managementStrong understanding of classical dynamics, modeling and simulation, and software developmentAbility to work in a fast-paced, autonomously driven, and demanding atmosphereExcellent communication skills both written and verbalMust be willing to travel and work extended hours as neededUnderstanding of agile software development methodology.Experience collaborating with other functional teams to seamlessly integrate software and hardware systems.Passion for advancing the marine industry
Yamaha Motor Co. USA • Kennesaw, U.S.
General Description: As a Process Operator, you will gain hands-on experience producing high-quality products in one of Goodyear's Chemical manufacturing plants. Goodyear Chemical is a division of The Goodyear Tire & Rubber Company which manufactures and markets rubber-related chemicals for various applications. You will also become familiar with safety, quality, and how to be successful in a team environment. We encourage you to allow us to invest in your success as you invest in ours; apply today! Responsibilities will include, but not be limited to: Perform routine operation of process and mechanical equipment. Control, monitor and adjust as necessary Troubleshoot process, product quality, safety and environmental problems and identify equipment requiring maintenance Review, analyze, and interpret lab data, distributive control monitoring information, log information from previous shift(s) and from the field, AVO (avoid verbal order) instructions, etc. to identify problems and make decisions Clean and maintain a safe work environment Abide by standard work procedures and job safety standards, including required PPE Perform a variety of manual tasks in varying temperatures for extended periods of time, which may include lifting light to heavy materials, climbing, standing, squatting, bending, and working at heights and/or confined spaces when applicable Adhere to Goodyear's attendance policy Communicate clearly and concisely, both orally and in writing Understand and follow all instructions, both orally and in writing Basic Qualifications: HS Diploma/GED Must be at least 18 years of age Must be legally authorized to work in the US without company sponsorship now or in the future Must be able to successfully complete all pre-employment criteria Ability to work any and/or rotating shifts, weekends, holidays, or overtime if applicable Basic computer skills Preferred Qualifications: AAS in Process Operations Technology Process Operations Technology Certification Previous manufacturing experience with basic knowledge and understanding of mechanical principles Previous experience as a Process Operator in the chemical, rubber or petroleum industry Distributed Control System (DCS) Console Board Operations experience Vocational/technical school and/or coursework Apprenticeship program within a mechanical discipline Previous military service experience within a technical specialty Demonstrated ability to understand and apply mechanical concepts and principles to solve problems Experience adhering to industry-specific safety standards Candidate Criteria: Self-motivated: demonstrates appropriate initiative with or without direct supervision Hard worker: someone who works diligently to get tasks done in a timely and safe manner Adaptability: the ability to make changes, and to be successful in changing environments Team player: an associate who can be counted on to assist the company in being successful Ability to review, analyze, and interpret information, identify problems and make decisions in routine and non-routine situations Commitment to working safely May be required to serve on the Emergency Response Team.
Goodyear Tire & Rubber Company • Pasadena, U.S.
General Description: As an Industrial Electrician, you will be responsible for supporting the manufacturing process by trouble shooting, preventative maintenance, and repair of all tire-related manufacturing, processing machinery and equipment. You will also be responsible for related safety and housekeeping obligations throughout the facility. Responsibilities will include, but not be limited to: Install, troubleshoot and maintain all electrical components and systems including electronic sensors, motors, drives, PLC systems Layout, assemble, install and test electrical fixtures, control equipment and wiring Inspect, maintain and repair wiring, motors, switchboards, switches, blown fuses, various indoor/outdoor lighting fixtures and electrical mechanisms at industrial level 110vac – 4160vac Install, inspect, clean and lubricate AC and DC motors up to 2500 hp Troubleshoot industrial control systems, e.g., hydraulics, temperature control systems with steam or electrical heat source, and chilled water as cooling source Perform minor welding such as fabrication and installing brackets and panel mounts Fit and connect conduit using various tools necessary to layout, cut, thread and bend as well as cut holes. Work with and around live circuits and making hot taps when required Maintain power, lights and alarms wiring systems (Facilities Maintenance) Log or use computerized work order system for repair and maintenance activities performed Interpret electrical schematics, blueprints, sketches, layouts, circuit diagrams or specifications Abide by safe work standards including Lock-Out/Tag-Out (LOTO), Fall Protection, Confined Spaces, and appropriate use of Personal Protective Equipment (PPE), NFPA 70E (Arc flash) Adhere to Goodyear's attendance policy Perform a variety of manual tasks in varying temperatures for extended periods of time, which may include lifting light to heavy materials, climbing, standing, squatting, bending, and working at heights when applicable. Basic Qualifications: HS Diploma/GED Must be at least 18 years of age Must be legally authorized to work in the US without company sponsorship now or in the future Must be able to successfully complete all post-offer, pre-employment contingencies Ability to work any and/or rotating shifts, weekends, holidays, or overtime if applicable Basic computer skills Must provide basic tools Preferred Qualifications: Previous experience as an Industrial Manufacturing Electrician with basic knowledge and understanding of machine technology, construction, operation of heavy industrial machinery and power/control devices. Industrial Electrician Journeyman's card or AAS in Electrical Technology Experience working with a variety of PLC and AC/DC drive controls, platforms, including but not limited to, Modicon, Siemens and Rockwell Desire and willingness to learn and perform across crafts Basic computer skills Experience adhering to industry-specific safety standards Candidate Criteria: Self-motivated: demonstrates appropriate initiative with or without direct supervision Hard worker: someone who works diligently to get tasks done Adaptability: the ability to make changes, and to be successful in changing environments Team player: an associate who can be counted on to assist the company in being successful whether working on a team or individual projects Commitment to working safely Willingness to adhere to tobacco-free policy.
Goodyear Tire & Rubber Company • Topeka, U.S.
DescriptionThe primary responsibility of this position is to ensure that the systems are operational 100% of the time to ensure the success of the company. Work closely with our management and staff to establish business objectives and determine what technologies they need to achieve them. Stay up-to-date on new software and coordinate with the all departments to implement new software and procedures. May also be responsible for designing customized systems for the company.Duties and Responsibilities Staying abreast of emerging technologies that can improve IT department performance and increase company profits. Develop and refine the Disaster Recovery plan Manage IT personnel. Create and implement IT policies, protocols and standards Ensure that IT department strategies and processes provide appropriate support to company goals Oversee contract negotiations with IT vendors, contractors and service providers. Communicating with other executives regarding costs, value and risk-potential of new IT projectsTechnical EnvironmentIBM iSeries Power-9 – (Must Have)OS400NCR — Power Enterprise & Power WarehouseCOLO in ColumbusRemote Journaling - MaxavaEDI Processing— Extol/Cleo ECRS ZiiZiiForms Printing - ICS FormatImaging System — Square 9 and S4iVMware - Windows Servers, Server 2016 Wireless System - ExtremeVoCollect/Honeywell Voice Pick RF Guns - MotorolaCisco Phone SwitchVoicemail and Call Replay managementVPN — Remote accessExchange 365 and Microsoft Office ProductsSecurity System and CamerasCell Phones and Tablets - VerizonCompany Web Site and Power-netREQUIREMENTSAS/400 - Application System/400, IBM AS/400, IBM RPG/400, IBM - RPG
Robert Half • Cincinnati, U.S.
The Agricultural Engineer with Animal Health International partners with our sales team in providing automation solutions in feed manufacturing to our new and existing customers. The Agricultural Engineer will develop automation solutions for customer feedmill operations, design and implement dispensing equipment solutions, and provide technical support for systems installed in customer facilities. This position will be responsible for supporting AHI dispensing equipment manufacturing and installation projects at customer sites.The Agricultural Engineer will support AHI business goals through partnering with our sales team and customers in providing automation solutions for feed manufacturing. The Agricultural Engineer will also develop processes for feed mill operations, design and support dispensing systems, and provide technical support service to our customers.Essential FunctionsEquipment Design and ManufacturingResponsible for developing hardware and control solutions for dispensing products.Develop and maintain efficient equipment assembly and test procedures in manufacturing.Create mechanical and electrical drawings using Solidworks.Research, design, and implement improvements to existing and new equipment/control processes.Test and verify accurate machine operation with new products. Work directly with manufactures on new products.Feed Mill ProjectsResponsible for developing automation processes and control solutions for beef and dairy feed mill operations.Provide technical support and consulting to customers on feed batching and mill operation.Develop batcher and mill operational specifications for control system development.Provide on-site support for installation and support of control solution projects.Coordinate with contractors on mill changes. Manage control system install projects.Service SupportProvide on-site support to Field Service Technicians and customers to maintain proper operation of equipment.Train personnel in all technical aspects of the equipment operation: trouble-shooting, service requirements, etc.Proficiency in ration calculations and data entry procedures.FDAApply FDA GMP’s to process and equipment design for beef and dairy operations.Support and train personnel in FDA regulations and procedures.Perform required assays and other testing as directed by FDA regulations and/or company policies and procedures.Working ConditionsPhysical Demand:Lifting or carryingOccasional or frequent moderate physical activityUp to 50 poundsSitting or standingContinuous moderate or occasional heavy physical activityClimbingContinuous moderate or occasional heavy physical activityStoop, bend, or crawlContinuous moderate or occasional heavy physical activityEnvironment Factors:Feedlot and Dairy customer environmentExtreme hot/cold temperaturesHigh voltageDirt or dustFumesSmokeLoud noisesHazardous chemicalsHazardous machineryTravel and On-Call:This position requires moderate travel (50%) in a national area. For this position being on-call is required.Minimum Qualifications: • Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or equivalent experience.• 3-5 years of mechanical/electrical experience.• Mechanical/electrical design and drafting abilities using Solidworks software.• Proven ability in process design and automation systems development.• Proven ability in process analysis, problem solving, and implementing solutions in a production environment.• Extensive experience in weighing systems, PLC systems, motor drives (frequency/DC), and other industrial automation devices.• Demonstrated success in prioritizing and time-management.• Oral or written communication skills.• Valid driver’s license and clean driving record.• Proficiency with office productivity tools such as Microsoft Excel, Word and PowerPoint. Preferred Qualifications:• Bachelor's Degree in Electro/Mechanical Engineering• Feed mill operation with steam flaking of grain• Agricultural work experience in the beef and dairy industries• Hardware and control system design
Careerbuilder • Greeley, U.S.
Who crafts your future? You do. Are you looking for a career where you can showcase your technical capability and passion for problem solving to ensure your customers can work in a comfortable, safe, and energy-efficient environment? Then look to Siemens! Our Culture: At Siemens, we live and foster an ownership culture, in which every employee takes personal responsibility for our company's success. We trust and empower our leaders to act as owners, advise their teams, and innovate to succeed. We communicate openly and honestly to learn from our failures and celebrate our successes. We recognize individual and team achievements frequently. We invest in our team members, offering a wide variety of internal and external development opportunities. What you will do for Siemens Smart Infrastructure: This position performs installation, startup and commissioning of building automation system equipment that has been newly installed. The objectives of building automation are improved occupant comfort, efficient operation of building systems, reduction in energy consumption and operating costs, and improved life cycle of utilities. You will complete the verification of point database and programming operations ensuring that they are consistent with scope of work for the intended integration and sequence of operations. This position may be located in the following cities: Chicago, Detroit Indianapolis, St Louis, Milwaukee, Minneapolis, Kansas City KS, or Des Moines IA and will require at last 50% travel throughout the Midwest. We will give you between $15,000-$20,000 of training to you in our technologies. Responsibilities: Network Technologies: Back up data from data servers and/or build automated backup procedures. Perform troubleshooting and resolve inconsistencies in the functions or sequence of operations. Set up and configure PC workstations and user interfaces. Confirm proper network performance. Operational Testing, Verification and Acceptance: Runs routine reports to review system operation. Technical issues will be reviewed with manager and customer to decide best course of action. Participates in final inspection and testing. Supports the assurance of customer acceptance and assists with training of customers on system operations. Completes and submits routine written reports; provides plans and control system documents to engineering for as-built drawings. Project Site Communication and Coordination: May provide support to others with the scheduling of trade contractors to coordinate startup services as needed. R Required Knowledge/Skills, Education and Experience High school diploma or state-recognized GED required. Completion of AAS Preferred. 5 or more years of increasingly responsible experience in installing and servicing electronic control and HVAC equipment. Must have experience in writing computer programs and software applications related to the HVAC Industry. Proven experience in the integration of low voltage building sub-systems using various industry protocols such as LON, BACNet, N2, Modbus, etc. is preferred Proven electro-mechanical aptitude (based on previous experience and/or education) along with user PC/software skills needed to be successful in this role. Having experience as a Machinist, electrician, mechanical engineer, a computer software programmer, a desktop support specialist, an elevator engineer, a computer network installation or video games programmer would be phenomenal fit for this position. Ability to work in a variety of circumstances including climbing ladders, scaffolds, and high-lift equipment, working in ducts, crawl spaces, roofs, basements, above ceilings, and in outside/inside/heat/cold/day/night conditions. Must be able to use hand-tools, laptop, email, smartphone, and tablet. Must be able to carry and move equipment and tools weighing up to 75 pounds unassisted. Ability to work in a team environment providing dedicated support to our customers. Proficient in Microsoft Office (Word, Excel & Outlook). Good verbal and written communication skills in English. Qualified applicants must be legally authorized for employment in the United States. Individual must possess a valid driver's license in good standing. Must be able to travel up to 75% of the time This position supports a Siemens customer that requires all employees and vendors to be fully vaccinated against COVID-19 where permitted by applicable law and in accordance with an accommodation based on legally protected reasons Benefits: Competitive salary based on qualifications Health, Dental and Vision plans with options from which to choose Matching 401(k) Competitive paid time off plan, holidays and floating holidays Company cell phone and laptop Extensive product training and professional career development Education and tuition reimbursement programs available Overtime, on-call pay, company uniform and vehicle, for eligible positions
Careerbuilder • Mount Prospect, U.S.