Volvo Construction Equipment (VCE) recherche un Usineur sur son site français de Belley (01, Ain – 300 personnes).Rattaché au Manager EAP, l’Usineur devra réaliser l'ensemble des opérations qualifiées d'usinage de pièces en respectant les instructions données en matière de sécurité, environnement, qualité, délai et coût. Il pourra également effectuer des opérations de retouches éventuelles, des travaux d'étude et de résolution des problèmes techniques du secteur d'affectation.ResponsabilitésRéaliser toutes les opérations d'usinage pouvant intégrer des procédés différents (fraisage, tournage, perçage, alésage...)Adapter le montage d'usinage en fonction de la pièce à réaliser, effectuer les procédures de prise d'origine, enregistrer le programme préconiséRéaliser la première pièce en séquentielRéaliser les pièces en continu en respectant les temps gammeRéaliser l'autocontrôle des opérations qu'il exécute et effectuer les retouches simples dans le fluxEvacuer les pièces selon le processus prévu, procéder à la mise en conditionnement s'il y a lieuDémonter si besoin le montage et nettoyer l'environnement du poste de travailUtiliser et s'assurer du bon état de fonctionnement des moyens (outils, outillages, machines...) mis à sa disposition et signaler toutes dégradations. Participer à la remise à niveau (entretien 1er niveau, plan de surveillance, ...)Se conformer aux instructions de travail détaillées et/ou procédures spécifiques pour minimiser le risque de défautsRendre compte à son encadrement de toute non-conformité ou problèmes particuliers par rapport aux spécificationsAssurer la traçabilité du produit en renseignant sur les registres établis à chaque étape où il y est demandéParticiper aux initiatives d’amélioration continue (réunions, groupes de travail, …)RelationsCe poste est rattaché au chef d’équipeInteraction au niveau basique avec les services de production, qualité, méthodes, logistique, environnement, sécurité et maintenanceConnaissances et expérience requisesCAP (tourneur / fraiseur) ou équivalent dans le métier3 ans d’expérience professionnelle dans un poste similaire dans une entreprise du secteurNotions informatiques
VolvoAuto Sweden Sa • Belley, France
We are looking for a skilled and experienced Manufacturing Engineer who will be responsible for designing, fabricating, machining components, and building (finished) machines and to successfully integrate them seamlessly (to enhance) the manufacturing process. The salary range will start at $100,000 per year and will increase based on the following: • Designs and builds custom machines that processes steel coils that get fed into tool and dies that perform the function of bending, stamping, forming, punching, and clinching. • Ability to incorporate and program 6 axis robots into our custom machines. • Takes drawings to machining to tooling machine assembly, and finally produce finished parts. • Ability to machine and program parts using: manual toolroom machinery as well as CNC mills, Lathes, Grinders, and etc. • Evaluate manufacturing processes by designing and conducting research programs; applying knowledge of product design, fabrication, assembly, tooling, and materials conferring with equipment vendors; soliciting observations from operators. • Ability to perform basic machine programing for PLCs • Ability to program stepper motors to perform the needed function in moving material. • Improve manufacturing efficiency by analyzing and planning work flow, space requirements, and equipment layout. • Keep equipment operational by coordinating maintenance and repair services; following manufacturer’s instructions and establish procedures; requesting special service. • Complete design and develop projects by training and guiding technicians and other engineers. • Evaluate existing manufacturing processes and workflows to identify areas that could benefit from changes and improvements. Our best engineers have this in common:• Bachelor’s degree in engineering with coursework in metal manufacturing process• Working knowledge of pneumatic and Hydraulic systems as applied to machinery development.• Ten to fifteen years’ experience with SolidWorks 2012 or later• A working knowledge of plastic injection molding machinery methods.• Experience in the creation of robotic work cells• Working knowledge of ANSI Y14.5-2009 and MIL-STD-100 standards and practices• Advanced understanding of motors and motor controls• Demonstrated ability to make good, data driven decisions quickly• Self-confidence to tackle both internal and external issues which affect project objectives• An uncompromising commitment towards achieving goal targets• Demonstrated ability to create detailed action items and follow up•Excellent written and oral communication skills•Presentation skills•Demonstrated technical expertise in new product development or sustaining existing products•Recognition as a technical subject matter expert in the product(s) overseen•Perform complex interference fit checks, motion studies, and tolerance stack-up analysis (GD&T) on medium assemblies.•Work with cross-functional teams to ensure project completion.
Careerbuilder • Temecula, U.S.
You will work in the manufacturing facility. You will perform tasks as directed by your supervisor. You will operate general manufacturing machinery such as brake press, punch press, drill, banding machine as well as use basic mechanical tools and measurement instruments. Physical demand of the job: � Standing, � Walking, � Bending, � Lifting moderate weight above your waist.You will be expected to work in accordance with GMP (good manufacturing practices) and WSIB regulations. Observe and maintain product quality and safety standards.
Alliance Employment Services • Chicago, U.S.
Looking for crews for a motorsports event scaffold construction project in Miami for 6 months, starting in the last week of December, for at least 40 hours a week. This will include but not be limited to the following:Clean up worksites from hazardous or obsolete materialAssist welders, carpenters, painters or other tradespeople on-siteHandle and transport materials (e.g. cement) and equipment (e.g. drills and grinders)Use power tools and machinery (e.g. forklifts) when neededRequirements are:Ability to meet the physical demands of the job (standing for long periods of time, lifting heavy loads of up to 40 pounds etc.)Good hand-eye coordinationFamiliarity with power tools and machinery is a plusCommunication and teamwork skills
Glassdoor Inc. • Miami Gardens, U.S.
The Agricultural Engineer with Animal Health International partners with our sales team in providing automation solutions in feed manufacturing to our new and existing customers. The Agricultural Engineer will develop automation solutions for customer feedmill operations, design and implement dispensing equipment solutions, and provide technical support for systems installed in customer facilities. This position will be responsible for supporting AHI dispensing equipment manufacturing and installation projects at customer sites.The Agricultural Engineer will support AHI business goals through partnering with our sales team and customers in providing automation solutions for feed manufacturing. The Agricultural Engineer will also develop processes for feed mill operations, design and support dispensing systems, and provide technical support service to our customers.Essential FunctionsEquipment Design and ManufacturingResponsible for developing hardware and control solutions for dispensing products.Develop and maintain efficient equipment assembly and test procedures in manufacturing.Create mechanical and electrical drawings using Solidworks.Research, design, and implement improvements to existing and new equipment/control processes.Test and verify accurate machine operation with new products. Work directly with manufactures on new products.Feed Mill ProjectsResponsible for developing automation processes and control solutions for beef and dairy feed mill operations.Provide technical support and consulting to customers on feed batching and mill operation.Develop batcher and mill operational specifications for control system development.Provide on-site support for installation and support of control solution projects.Coordinate with contractors on mill changes. Manage control system install projects.Service SupportProvide on-site support to Field Service Technicians and customers to maintain proper operation of equipment.Train personnel in all technical aspects of the equipment operation: trouble-shooting, service requirements, etc.Proficiency in ration calculations and data entry procedures.FDAApply FDA GMP’s to process and equipment design for beef and dairy operations.Support and train personnel in FDA regulations and procedures.Perform required assays and other testing as directed by FDA regulations and/or company policies and procedures.Working ConditionsPhysical Demand:Lifting or carryingOccasional or frequent moderate physical activityUp to 50 poundsSitting or standingContinuous moderate or occasional heavy physical activityClimbingContinuous moderate or occasional heavy physical activityStoop, bend, or crawlContinuous moderate or occasional heavy physical activityEnvironment Factors:Feedlot and Dairy customer environmentExtreme hot/cold temperaturesHigh voltageDirt or dustFumesSmokeLoud noisesHazardous chemicalsHazardous machineryTravel and On-Call:This position requires moderate travel (50%) in a national area. For this position being on-call is required.Minimum Qualifications: • Bachelor's Degree in Mechanical Engineering, Electrical Engineering, or equivalent experience.• 3-5 years of mechanical/electrical experience.• Mechanical/electrical design and drafting abilities using Solidworks software.• Proven ability in process design and automation systems development.• Proven ability in process analysis, problem solving, and implementing solutions in a production environment.• Extensive experience in weighing systems, PLC systems, motor drives (frequency/DC), and other industrial automation devices.• Demonstrated success in prioritizing and time-management.• Oral or written communication skills.• Valid driver’s license and clean driving record.• Proficiency with office productivity tools such as Microsoft Excel, Word and PowerPoint. Preferred Qualifications:• Bachelor's Degree in Electro/Mechanical Engineering• Feed mill operation with steam flaking of grain• Agricultural work experience in the beef and dairy industries• Hardware and control system design
Careerbuilder • Greeley, U.S.
Certified Welder Fabricator Responsibilities: Fabricates and assembles structural metal products,Sets up and operates fabricating machines, such as brakes, rolls, shears, flame cutters, and drill pressesDesigns and constructs templates and fixtures.May fabricate and assemble sheet metal products.May set up and operate machine tools associated with fabricating shops, such as radial drill press, end mill, and edge planer.Certified Welder Fabricator Requirements:Must have active Welder CertificationsPrevious experience as a Welder is requiredPrevious experience Bending / Rolling metal is a plusMUST BE ABLE TO READ BLUEPRINTSMust be able to physically meet job requirements; standing, kneeling, lifting up to 50 lbs.
Careerbuilder • Cincinnati, U.S.
In this position you will be working in the manufacturing facility. You will be performing tasks as directed by the supervisor. You will operate general manufacturing machinery such as brake press, punch press, drill, banding machine as well as use basic mechanical tools and measurement instruments. Physical demand of the job: � Standing, � Walking, � Bending, � Lifting moderate weight above your waist.You will be expected to work in accordance with GMP (good manufacturing practices) and WSIB regulations. Observe and maintain product quality and safety standards.
Alliance Employment Services • Toronto, Canada